Message Board Forum

Guest  

Welcome Guest, posting in this forum requires registration.

Pages: [1]
Topic: Software Defined Radio Kits
VE6BLD
Administrator
Posts: 62
Software Defined Radio Kits
on: November 22, 2010, 21:42

I have built several of the software defined radio kits put out by KB9YIG. These are small PC boards that connect to an antenna, battery (or power supply) and the sound card in your computer. With a normal sound card you have a bandwidth of 48 KHz and with a high end 24 bit sound card you can see a 96KHz portion of a band.


Best way to see what this is about is to go to VE3NEA's website http://www.dxatlas.com/rocky/

and, after reading the info, download the software.


The receivers are extremely selective and quite sensitive. There is also a new QRP transceiver kit for 30 and 40 meters that works on SSB, CW and digital modes.


Now for the good part: the receiver kits cost US$11 and the transceiver kits US$32 including shipping.


Many hams use the panadapter display in the SDR software by building a receiver kit tuned to the IF of their station transceiver.


You can see some photos by looking me up on QRZ.com and following the link to my photo album.


Please do not hesitate to contact me with any questions.

Earl VE6/4Z4TJ


Welcome to the CAARC web site. I have been a Ham since 1978 and am active on most modes from HF to UHF Satellite communications.

Pages: [1]
WP Forum Server by VastHTML | LucidCrew
Version: 1.6.5 ; Page loaded in: 0.018 seconds.