|
Side view-2
A farther view back so you can see the side profile of the chassis frame..
Date: 03/18/2008
Views: 595
|
Front view
A straight on view of the front panel showing the four tuning knobs and large bargraph display...Nothing is painted yet...
Date: 03/18/2008
Views: 586
|
front panel
The front panel showing the switches, meter and controls etc in place..
Date: 04/08/2008
Views: 432
|
|
Chassis parts-1
The under belly showing the placement of the parts and components..
Date: 04/08/2008
Views: 614
|
Back panel
Finally the parts and chassis are finished other than painting, this is the rear panel showing holes for all the connectors..
Date: 04/08/2008
Views: 517
|
Bias boards
The bias boards in position..
Date: 04/08/2008
Views: 604
|
|
Filament res
A closer view of the filament resistors mounted..
Date: 04/08/2008
Views: 582
|
Rear inside panel
A view towards the rear of the back panel...
Date: 04/08/2008
Views: 623
|
Side fan
The view from the side showing one of the two cooling fans..
Date: 04/08/2008
Views: 647
|
|
Decal-1
Now that all the parts are mounted I painted the panels and applied this new decaling process for labels..This pix shows all the labels and extras on the decal paper
Date: 04/12/2008
Views: 633
|
Decal-2
More decal labels..
Date: 04/12/2008
Views: 662
|
Decal-3
A different decal for testing the labeling process..
Date: 04/12/2008
Views: 607
|
|
Decal-4
Another decal sheet..
Date: 04/12/2008
Views: 669
|
Front Panel-1
This is pix of the finished front panel, slightly blurry pix though..
Date: 04/13/2008
Views: 641
|
Front Panel-2
A close up look at the labeling
Date: 04/13/2008
Views: 696
|
|
Front Panel-3
Another shot...
Date: 04/13/2008
Views: 567
|
Rear panel-1
This is the rear panel, the large pix label was difficult to apply as it got streched a bit..
Date: 04/13/2008
Views: 599
|
Rear Panel-2
A closer look at the rear panel..
Date: 04/13/2008
Views: 539
|
